Power Washing Siding

Power washing your siding can increase the curb appeal of your home, but you need to be aware of some precautions. First, ensure that your siding is free of stains and damage. If you see any, you should repair them before you proceed with power washing. It’s also best not to consider power washing siding if it contains lead paint. Lastly, be sure to use the right materials and attachments.

Less pressure is better

If you want to do a thorough job of power washing your siding, you should aim for less than 1,500 psi. This is because too much pressure can cause damage to the siding. In addition, too much pressure can create an environment where mold can grow. So, it is recommended that you start off by holding the wand at least five feet away from the surface and gradually increase the pressure.

Proper power washing techniques will also keep your siding in good condition and look its best. The right techniques will help you get rid of mold and restore your siding to its original glory. You should also pay special attention to any cracks or holes that need to be covered. Power washing over cracks and holes can damage them, which can make them more susceptible to mold. It is advisable to hire a professional power washing company to make sure that any openings are covered.

Power Washing Siding

Power Washing Siding

Covering up your belongings before power washing

Covering up your belongings before power washing is an important step to ensure a clean job. To keep your siding clean, use a cleaning solution made especially for power washing, or simply combine a regular soap and water solution. The siding should also be free of debris, which can fly out and damage the siding.

When power washing, always choose a day with low wind to reduce the risk of damage to your belongings. Avoid power washing in direct sunlight and close windows and light fixtures. Also, avoid using ladders to reach high points. When power washing your siding, hold the pressure wand between one foot and three feet from the siding surface.

Avoiding etching

One of the most common mistakes people make when power washing their siding is not using high enough pressure. Because power washing machines are not industrial-scale machines, their pressure control is limited. Most homeowners have no idea how much pressure is necessary to properly clean siding. This can result in cracking and etching.

Proper power washing techniques can keep your siding in good condition and help restore it to its original look. They can remove mold and restore vinyl siding. Make sure to avoid power washing over cracks or holes, as this can damage the siding or cause unsightly streaks. It is also important to remember not to power wash your gutters before you power wash the siding, because the hot water can leave marks and scuffs.

Using a detergent

Before power washing your siding, you should pre-wet it with a detergent. The detergent will break down the bonds between the surface dirt and organic growth. This will allow you to use a low-pressure rinse to remove stains and soiling. It is important to remember that the colder the weather, the slower the cleaning process will be.

After power washing, it is important to rinse the siding thoroughly to remove any residual detergent. The detergent will make your siding look streaky and could damage the siding. Moreover, the detergent is different from general-purpose cleaners and can cause damage if used too generously.

Power Washing Vinyl Siding

Power Washing Vinyl Siding

Johnny Tsunami
(206) 899-0003